Our line of explosion proof lights and explosion
proof LED lights represent the best in high quality explosion proof
lighting technology. View More Information
LED Lights:
We carry an extensived line of LED lights
including LED light bars, explosion proof LEDs, LED lights for military
applications, boats, vehicles, security lighting and more.
View More
Information
Infrared LED Lights:
Infrared LED light emitters for covert
applications. Magnalight Infrared LED emitters are ideal for military and
security applications where a covert source of infrared light is
needed. View More Information
Golight Spotlights:
We carry the full line of Golight remote
controlled spotlights and related accessories. Magnalight is the only source for
the Golight Stryker Remote Control Spotlight with magnetic base.
View More Information
Hunting Spotlights:
Magnalight stocks a comprehensive line of
hunting lights and related accessories. Our hunting lights include rechargeable
handheld LED spotlights and HID spotlights with red lenses. View More Information
Military Spotlights:
Our HML series of spotlights have been tested
and approved for use by the Marines, Army, Navy, and Air Force and are part of
the military’s Special Forces' Escalation of Force Kits. View More Information
24 Volt Lights:
Magnalight manufactures and stocks an
extensive line of 24 volt
lighting equipment that ranges from 12/24 volt spotlights and floodlights to
multimillion candlepower searchlights and industrial grade work
lights. View More Information
Magnalight regularly develops and
manufactures new additions to its line of explosion proof lighting and industrial grade lighting products and is proud to offer the latest
in explosion proof LED lighting and explosion proof paint spray booth lighting. Magnalight also manufactures a wide array of military and
law enforcement related accessories including the concealable, back up universal handcuff key (plastic handcuff key)
used by Air Force pilots, Navy SPAWAR, Navy Seals and Special Operations
military personnel to effect escape in hostage or prisoner
situations.
If you have any questions or special
requirements regarding any of our industrial grade lighting solutions please
contact us by E-mail at
sales@magnalight.com You
can also call us toll free at 1-800-369-6671. Purchase orders
can be faxed to us at 903-498-3364 Magnalight can provide
detailed technical information regarding any of its products and is capable of
working with customers to create unique lighting solutions to suit their needs
and requirements.
We carry a complete line of
HID off road and HID
equipment lights, including the Acro Light line.
HID flood lights with
permanent and magnetic mount options work on 12 and 24 volt DC systems and
provide illumination that extends 250 feet. The permanent mount and magnetic
mount HID spotlights project a beam to 3000 feet.
Larson Electronics Magnalight is a
manufacturer and as such we maintain a large available inventory of our magnetic
mount spotlights, HID spotlights. HID flashlights and
the Golight Stryker and Golight Radioray remote controlled spotlights, battery
operated flashing strobe lights, LED flashlights and
LED headlamps. Because of our extensive inventory and "make to order" capacity,
nearly all orders for spotlights and flashlights received before 4 PM CT are
shipped same day via UPS.
Many of our professional grade
spotlights and flashlights make excellent gifts for him or gifts for men. Remote
controlled spotlights with magnetic base, military spotlights, handheld
spotlights, vehicle mount spotlights, rechargeable spotlights, rechargeable flashlights, hunting spotlights, hunting searchlights
and state of the art hid flashlights all
make fine christmas gifts for men, and are sure to please even the most
discriminating friends and family.
Contact us at sales@magnalight
.com or call us toll free at 1-800-369-6671 for mor
information regarding any of our products. Purchase orders can be faxed to us at
903-498-3364 Magnalight can provide detailed technical
information regarding any of its products and is capable of working with
customers to create unique lighting solutions to suit their needs and
requirements.
The Magnalight PML-70LED-DP-120 70 Watt HID Spotlight produces 6,020 lumens of intense bright light and offers the versatility of both 120VAC and 12VDC operation from a compact spotlight profile. This permanent mount LED spotlight is equipped with a rugged polycarbonate control handle and tension hinges that allow the unit to be easily adjusted and set into position and produces a powerful, exceptionally tight spotlight beam reaching over 850 feet in length. At 120 feet, the spot beam in approximately 30 feet in diameter.
This 70 watt LED spotlight contains a 7, 10-Watt LEDs. Producing 6,020 lumens of bright white light while drawing only .58 amps (5.8 Amps on 12 Volt), the light beam from this unit in spot configuration exceeds 850 feet in length while an optional flood configuration covers an area approximately 250 feet long by 275 feet wide. This unit is IP68 rate waterproof to 3 meters, sealed against ingress od dust and dirt and ideal for use in industrial, commercial and private applications.
The 4 inch square mounting base has 4 corner bolt holes to keep the spotlight secured to the mounting surface under extreme vibration and off-road conditions. Tension hinges incorporated into the mounting assembly allow the light to hold its position once adjusted without the need to set or lock any hardware before releasing the adjusting handle. The operator simply adjusts the unit to the desired position and releases it to set the unit into position. The LED unit itself measures 7" in outer diameter by 3.5" in depth.
Trunnion Mount: The trunnion mounting design on the LED10W-70 allows for post-installation angle positioning. This means that by loosening 2 thumb bolts located on either side of the light, the operator can adjust the positioning angle of this light 270 degrees. Then he/she would simply have to tighten thumb bolts to lock the angle in place. No tools are required for adjusting angle. This means that even after positioned onto the 4X4 permanent mount plate, the unit can still be adjusted up to 270 degrees.
This unit includes our DCP-11-DP transformer that converts common 120VAC current into 12VDC current, allowing operation of this spotlight from vehicles with 120 AC power sources, indoors or outdoors and anywhere 12 volt DC power is not readily available. The transformer can be easily disconnected and the light connected directly to 12 volt DC power sources as well, adding further versatility and convenience to this spotlight’s already versatile design.
Voltage Control: This LED comes standard with a 120VAC/12VDC step down transformer which enables the operator to run this unit straight from a wall outlet. It also comes with a 25' SOOW cord, this allows the operator to mount the light and the transformer at two different locations. The transformer included is actually 120-277VAC so it has near universal voltage compatibility. Alternatively, the transformer can be removed, making these units run off of 9-50VDC low voltage range. A deutsch connector must be present to attach light to a 12VDC current. These units are able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These LED10W series LED lights can operate on current ranging from 9 to 50VDC without any modifications necessary as a result. This multi-voltage capability makes these units ideal for mobile and stand alone applications such as those found on commercial boats, heavy equipment and vehicles where power systems don’t always operate with 12 volts and external generators, transformers or inverters are impractical.
Durability: As well as unparalleled heat control, the LED10W-70 series of LED light bars from Magnalight also offer IP68 rated construction that is designed to withstand extremes of environmental and operating conditions. These units can withstand rapid temperature changes of -40 degrees Celsius to 85 degrees Celsius, are waterproof to three meters and resist ingress of dust, dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The CREE XLamp MC-E® LEDs offer resistance to shocks and vibrations and are rated at 70% lumen maintenance after 50,0000 hours of use.
Heat Management: Heat is the single largest factor in premature LED failure and color shifting. As a result, many manufacturers reduce the output of their LEDs to reduce the amount of heat produced. These LED light bars utilize an extruded aluminum housing that incorporates an advanced heat radiating design which dissipates heat efficiently to produce the maximum amount of power and longevity from the integrated Seoul Z-Power Emitters. The end result is more light and longer LED life with higher average lumen maintenance after 50,000 hours.
PWM Control: The pulse width modulation drivers in this unit also provide secondary benefits through the ability to tap into a provided input wire with an external pulse generator and adjust the duty cycle of the current being applied to the LEDs. Thus, you can connect an external dimmer, switch or pulse control and adjust the perceived output of the light, effectively causing the light to flash, dim or brighten to the desired levels. Additionally, this method of controlling light output results in a corresponding drop in amperage draw, so if the duty cycle is cut back to 50% there will be a matching 50% reduction in amperage draw. These units are also able to monitor and adjust input current to maintain the correct LED voltage levels regardless of input levels across a specific range. These LED10W-70 light bars can operate on current ranging from 9 to 46VDC without any modifications necessary as a result. This ability to sense and adjust input current also provides protection against voltage spikes and drops that can occur in vehicle electrical systems which would otherwise result in burning up or premature LED failure without it.