|
|
|
 Subscribe-Regularly Updated
Contact/Ordering/Product
Information
Links will open in new windows.
Explosion Proof Lights:
Our line of explosion proof lights and explosion
proof LED lights represent the best in high quality explosion proof
lighting technology.
View More Information
LED Lights:
We carry an extensived line of LED lights
including LED light bars, explosion proof LEDs, LED lights for military
applications, boats, vehicles, security lighting and more.
View More
Information
Infrared LED Lights:
Infrared LED light emitters for covert
applications. Magnalight Infrared LED emitters are ideal for military and
security applications where a covert source of infrared light is
needed.
View More Information
Golight Spotlights:
We carry the full line of Golight remote
controlled spotlights and related accessories. Magnalight is the only source for
the Golight Stryker Remote Control Spotlight with magnetic base.
View More Information
Hunting Spotlights:
Magnalight stocks a comprehensive line of
hunting lights and related accessories. Our hunting lights include rechargeable
handheld LED spotlights and HID spotlights with red lenses.
View More Information
Military Spotlights:
Our HML series of spotlights have been tested
and approved for use by the Marines, Army, Navy, and Air Force and are part of
the military’s Special Forces' Escalation of Force Kits.
View More Information
24 Volt Lights:
Magnalight manufactures and stocks an
extensive line of 24 volt
lighting equipment that ranges from 12/24 volt spotlights and floodlights to
multimillion candlepower searchlights and industrial grade work
lights.
View More Information
Magnalite or Magnalight
Larson Electronics Magnalight
Larson Electronics’ Magnalight is a
manufacturer and distributor of industrial-commercial grade lighting products.
Magnalight carries an extensive line of lighting products including explosion proof lights, hazardous location lights, explosion proof paint spray booth lights, high power LED lights, remote control HID Golight spotlights, LED flashlights,
military spotlights, infrared LEDs, LED
boat lights and industrial light towers. Magnalight also
manufactures and distributes a wide range of HID high power spotlights and HID flashlights that are ideal for
use as military spotlights
and law enforcement searchlights as well as effective for use in the utility and emergency services
industries.
Magnalight products that are
particularly well suited to military and law enforcement applications include
police flashlights,
police lights, unity post mount spotlights, unity roof mount lights, remote control Golight spotlights, remote control spotlights with magnetic bases, rechargeable spotlights,
rechargeable flashlights, led flashlights, high
intensity discharge military spotlights with magnetic
bases and magnetic tripods for
flashlights and spotlights. Magnalight manufactures and carries an extensive
line of military spotlights, floodlights, and military
grade lighting accessories and equipment.
Many of Magnalights lighting
products can serve equally well in the public and private sector as hunting spotlights, boating spotlights, camping lights,
off-road and ATV lights, and infared security lights; this includes a wide array of LED lights and LED light bars that
can operate on a variety of voltages ranging from 9 to 42 VDC and can be mounted
on cars, trucks, boats and
heavy equipment.
Magnalight is a large distributor
of the Golight line of remote controlled spotlights and stocks
a comprehensive variety of HID or high intensity discharge Golights, Golight marine spotlights and searchlights, Golight floodlights,
military Golights and
a wide array of camouflage Golights for hunting and
off-road use. Magnalight is the only source for the Golight Stryker Remote Control Spotlight with magnetic
base and offers a wide variety of mounting
options for both the Golight Stryker and
Golight RadioRay series of spotlights.
Magnalight develops and stocks a wide
range of explosion proof lights and products as well as intrinsically safe lights and
intrinsically safe LED lights. Magnalight’s explosion proof line of lights carry the required
explosion proof certifications and approvals and are U.L. certified for use in
hazardous locations according to their respective class, division and zone
ratings. Magnalights hazardous location lighting includes explosion proof fluorescent lights
for paint spray booths, Class 1 Div 1 flashlights and intrinsically safe lights, portable and cart mounted tank lights, explosion proof droplights,
explosion proof LED lights and intrinsically safe flashlights.
Magnalight regularly develops and
manufactures new additions to its line of explosion proof lighting and industrial grade lighting products and is proud to offer the latest
in explosion proof LED lighting and explosion proof paint spray booth lighting. Magnalight also manufactures a wide array of military and
law enforcement related accessories including the concealable, back up universal handcuff key (plastic handcuff key)
used by Air Force pilots, Navy SPAWAR, Navy Seals and Special Operations
military personnel to effect escape in hostage or prisoner
situations.
If you have any questions or special
requirements regarding any of our industrial grade lighting solutions please
contact us by E-mail at
sales@magnalight.com You
can also call us toll free at 1-800-369-6671. Purchase orders
can be faxed to us at 903-498-3364 Magnalight can provide
detailed technical information regarding any of its products and is capable of
working with customers to create unique lighting solutions to suit their needs
and requirements.
Larson Electronics
Larson Electronics manufactures the
Magnalight 12 volt spotlights with magnetic base and 12 volt searchlights with magnetic base with magnetic bases and 16 foot cords in Dallas, TX. These
industrial grade 12 volt spotlights
have been a staple of the cable, telephone and electric utility industry since
1967. Magnalight has since its beginnings expanded this to include the military/law enforcement
industries, federal and local governments, and emergency and first responder industries as well.
We carry a complete line of
HID off road and HID
equipment lights, including the Acro Light line.
HID flood lights with
permanent and magnetic mount options work on 12 and 24 volt DC systems and
provide illumination that extends 250 feet. The permanent mount and magnetic
mount HID spotlights project a beam to 3000 feet.
Larson Electronics Magnalight is a
manufacturer and as such we maintain a large available inventory of our magnetic
mount spotlights, HID spotlights. HID flashlights and
the Golight Stryker and Golight Radioray remote controlled spotlights, battery
operated flashing strobe lights, LED flashlights and
LED headlamps. Because of our extensive inventory and "make to order" capacity,
nearly all orders for spotlights and flashlights received before 4 PM CT are
shipped same day via UPS.
Many of our professional grade
spotlights and flashlights make excellent gifts for him or gifts for men. Remote
controlled spotlights with magnetic base, military spotlights, handheld
spotlights, vehicle mount spotlights, rechargeable spotlights, rechargeable flashlights, hunting spotlights, hunting searchlights
and state of the art hid flashlights all
make fine christmas gifts for men, and are sure to please even the most
discriminating friends and family.
Larson Electronics' Magnalight can also
be viewed in these languages - Arabic Spanish Japanese Italian Portuguese Russian French.
Contact us at sales@magnalight
.com or call us toll free at 1-800-369-6671 for mor
information regarding any of our products. Purchase orders can be faxed to us at
903-498-3364 Magnalight can provide detailed technical
information regarding any of its products and is capable of working with
customers to create unique lighting solutions to suit their needs and
requirements.
Magnalight Links
Follow Magnalight on
Facebook
|
|
|
Explosion Proof Paint Spray Booth LED Lighting - 2 Foot, 2 Lamp Fixture - Class 1, Div. 1
|
View Larger Image
| |
Part # EPL-24-2L-LED Price: $831.00
Spec Sheet
Fiche technique
Dimensions
Spectrum Chart
Video
Video 2
|
Made in the USA
The Magnalight EPL-24-2L-LED Explosion Proof LED Light Fixture is U.S./Canada U.L. approved Class 1 Division 1, Class II Division 1, has a T6 temperature rating and is a superior lighting solution for areas where flammable chemical/petrochemical vapors or pulverized dust exist or have the potential to exist.
This 2 foot long, 2 LED tube, explosion proof light fixture is ideal for use in locations requiring powerful yet compact hazardous location lighting that will improve overall illumination levels and light quality while reducing operating costs.
The EPL-24-2L-LED is equipped with Magnalight’s specially designed LED T-series bulbs which produce 15% more illumination at 8 feet as compared to standard T8 lamps when measured with an Extech light meter. Our LED-T series bulbs are visibly brighter than standard T8s and have consistently surprised many of our customers with their unexpectedly high light output levels. This 2 LED bulb explosion proof fixture is lighter in weight, has a slimmer profile, and produces more light than traditional explosion proof fluorescent fixtures. The 2 foot long T17 LED tube design bulbs included with this unit are rated at 50,000+ hours of service life, which is nearly twice as long as standard T8 bulbs.
This fixture carries a T6 temperature rating and is U.L. approved Class 1 Division 1, Groups C and D, Class 1 Division 2, Group A,B,C and D, and Class II, Division 1 and 2, Groups E, F and G. |
|
|
|
We have eliminated the ballast box normally associated with fluorescent fixtures which reduces overall weight, creates a slimmer unit profile, and helps this LED fixture maintain a T-6 temperature rating. The solid state design of the LED lamps give this fixture superior resistance to damage from vibrations and extremes in temperature as well as a lamp service life over twice that of standard T8 bulbs. The 15 watt LED lamps produce more illumination than standard T8 bulbs. The LED bulbs used in this fixture are our new second generation LED T series 15 watt T17 style lamps which produce 15% more light than standard T8 bulbs when measured from eight feet. This fixture is multi-voltage capable (not multi-tap) and works on the following voltages: 120 Volt 60 HZ, 220 Volt 50 HZ, 240 Volt 60 HZ, 277 Volts 60 HZ. We also make a 12-24V DC version for low voltage applications (-LV suffix). Our EPL-24-2L-LED LED light fixture is U.S. and Canada U.L. approved for use in paint spray booths. Click here for dimensional drawings for this explosion proof light.
Additional mounting options:
Unless otherwise specified, our standard, most popular configuration is the bracket end mounting shown above. We also offer a pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or conduit).
Standard Bracket Mounts: Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt hole at the top of the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg. The pictures shown above illustrate the side brackets. The third picture enlarged below also shows the brackets at the both ends of the light.
Suggested Applications: Paint spray booths, Aircraft maintenance, Oil drilling rigs, Refineries, Solvent and cleaning areas, Gas processing plants, Chemical manufacturing, Waste treatment plants, Gas processing plants.
| Made in USA Quality |
Superior LED Benefits |
|
1. Each unit dialectrically tested.
2. Fixture arrives assembled and lamped to reduce installation time and cost. Adjustable mounting brackets enable the operator to choose any mounting angle for the fixture.
3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy
4. No ballast box. No ballast to replace. We simply run the black wire to one end of the bulb and white wire to the other.
5. Heavy gauge extruded aluminum reflectors with high gloss reflective finish. Resists dents and corrosion.
6. A wrench is used to unscrew the end caps for relamping the fixture, while some competitive models require the “tap and knock off” method to loosen the end cap.
7. Explosion proof, impact and heat resistant Pyrex tubes provide lamp protection.
|
1. 50,000 hour lifespan.
2. Can SAVE 50% or more on energy.
3. Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs.
4. Reduces energy use and prolongs life-spans of peripheral cooling units (A/C, refrigeration)
5. 100% recyclable.
6. No toxins-lead, mercury.
7. No UV light, infrared radiation or CO2 emissions.
8. Qualifies buildings for LEED and other sustainable business certifications.
9. Bright, even light maintains consistent color over time.
10. Instant on/off – No flickering, delays or buzzing.
11. Very good color rendering.
12. Vibration/impact resistant.
13. Significantly cooler operation.
14. Less frequent outages, higher output improves workplace safety.
15. California Title 24 Compliant | |
|
Specifications / Additional Information
| EPL-24-2L-LED Explosion Proof |
U.L. Ratings |
| UL Listing: United States - Canada |
Class 1 Division 1, Groups C and D |
| Dimensions: W-11.25" L-27.5" H-8.5 " |
Class 1 Division 2, Group A,B,C,D |
| Weight: 32 Lbs |
Class II, Division 1& 2, Groups E, F G |
| Total Watts: 30 watts |
UL 844, 924 |
| Voltage: Multi- 120V-60hz 220V-50hz 240V-60hz 277V-60hz |
UL 1598 Marine Type |
| Low Voltage (Op17tional): 12-24V DC |
UL 595 Outdoor Marine Type (Saltwater) |
| LED Lamp Life Expectancy: 50,000+ Hours |
UL Certified- U.S./Canadian Safety Standards |
| Efficiency: 90 Lumens per Watt |
|
Ambient Operating Temp Range: -30 C to 85 C
Operating Temp Rating: T6 Rated
Minimum Operating Temp: -30 C
Maximum Case Temp: 90 C |
|
| Beam Angle: 150 degrees |
Special Orders- Requirements |
| Color Temp: 5300K- |
Contact us for special requirements |
| Mounting: Bracket Standard - Pendant Optional |
|
| Wiring Hub: 1/2 inch threaded |
Toll Free: 1-800-369-6671 |
| Warranty: YES- 5 Years* |
Intl: 1-903-498-3363 |
| U.L Approval: U.S Certificate Canada Certificate |
E-mail: sales@magnalight.com |
|
*5 year warranty replacement on this LED light (or LED bulbs for light fixtures with removable LED bulbs). After 30 days, the customer ships the failed LED light and/or LED bulb to Larson Electronics’ Magnalight at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics Magnalight will provide a return label via email to the customer. When the failed light is returned, Magnalight will ship a new replacement. |
| Scroll Down to Purchase- Please note: 4 day lead time on this light.
| | Click here to view the Explosion Proof Light Design Description
| |
| Part #: | EPL-24-2L-LED (47225) | | | In Stock: | Yes |
| | |
Customer Rating:
9.5 / 10
4917 customer reviews
|
|
|
 Sale Prices in RED
| Product | Part # | Price | Option 1 | Option 2 | Option 3 | Qty |
|
|
|
| Related Articles |
| |
12/05/12 |
Explosion Proof Protection Against Combustible Dusts
One of the most serious dangers dusts pose, however, is the threat of fire or explosion if exposed to an ignition source. Almost any type of material, from iron to wheat, can become explosively flammable when ground into fine particulates, and in many cases little more than a spark is all that is needed to produce this ignition.
[...] |
| |
02/17/12 |
Comparing LEDs and Incandescent Bulbs: Opposite Ends of the Lighting Spectrum
The process by which LEDs produce light is called electroluminescence, and it is far more efficient than the process of resistance used in incandescent lamps. Very little energy is wasted as heat in an LED, and more of the electrical energy converted to light. This allows LEDs to produce the same amount of light as an incandescent while using only a fraction as much electrical energy. [...] |
| |
01/30/12 |
Lighting Color Temperature in Basic Terms and Applications
Commercial applications most often make use of lamps producing cool white light in the 4000 to 6500 Kelvin range because their light is sharper and more intense, with better color rendering and contrasting properties. Objects illuminated by these lamps appear brighter, more sharply defined, making these lamps well suited for offices, retail stores and commercial areas where detail and sharpness is important.
Lamps with temperatures around 5000-5500 Kelvin are usually considered to produce natu [...] |
| |
10/05/11 |
Choosing Spray Paint Booth Lighting and Booth Design
A poorly lit paint booth with weak ventilation will lead to poorly matched colors and lots of finishing work to deal with paint contaminants. So, it’s best to be realistic and have a few solid ideas of what you are looking for in a paint spray booth in order to ensure that your new booth is all asset and no liability. [...] |
| |
09/21/11 |
IECex/ATEX and North American NEC HAZLOC Equipment Classification
North America is presently not operating with the IECex/ATEX schemes although some effort has been made to produce some homogenity between North American and European Standards, most notably the US and Canada's adoption of a Zone system (NEC 505) modeled after European Schemes. However, despite the great similarity between North American and European Zone systems, they are not identical and are not interchangeable.
[...] |
| |
08/03/11 |
Hazardous Locations: Collapse the Triangle and Prevent Ignition
With hazardous locations, it is rarely easy or practical to remove either oxygen or fuel. This is because it is impossible to operate an oxygen free environment, and the very compounds that are present are the very part of the industrial process. Thus, removing heat, or rather the source of ignition becomes the primary target for practicing prevention. Indeed, when incidents arise, it is often determined that “inadvertent ignition” had taken place. So, it is then important to identify and unders [...] |
| |
07/13/11 |
Combustible Dust Standards and Preemptive Safety
As of this writing, OSHA has yet to institute a solid set of standards for combustible dusts. Many officials adopt NFPA recommendations into their local fire codes as a result in order to attempt some level of regulatory standards across a broad spectrum. Whether or not any meaningful regulation emerges from OSHA in the near future, it is best that any industry or commercial operation associated with combustible dusts be preemptive and adhere to any local regulations as well as adopt their own m [...] |
| |
02/06/11 |
LED Fluorescent Tube Fixtures: Efficiency Beyond Lumens vs Watts
LEDs retain several distinct advantages over fluorescent lamps. LEDs do not require any ballast for their operation. Using entirely solid state electronics, the current and output of LEDs can be easily regulated and maintained. There is no initial startup or warm up period normally associated with ballast equipped luminaries. [...] |
| |
12/16/10 |
Infrared Light and CCD Based Digital Cameras
When most of us think of night vision devices we usually picture the elaborate electronic headgear or special cameras used by military personnel. We usually assume the technology is complicated and the price exorbitant and so we also assume that attractive as being able to see in the dark may be, its beyond the realm of us mere mortals. [...] |
| |
12/16/10 |
How Do You Know If a Light is really Explosion Proof?
Hazardous location lighting equipment is in the simplest explanation used in places where concentrations of volatile gases, flammable dust or particulates, or flammable chemicals are high enough to present a danger of ignition that can lead to explosion or fire. [...] |
| |
09/02/10 |
Spray Booth Lights: Which Type for Best Results?
Most paint spray booths utilize one of two types of lighting fixtures in their design, either fluorescent tubes, or high intensity discharge lamps. Incandescent lamps are poor choices for spray booth applications because they are highly inefficient, have very short life-spans, and produce copious amounts of heat during their operation. [...] |
| |
08/02/10 |
Confined Space Lighting for Hazardous Locations
Confined spaces represent some of the most dangerous work places in commercial industries. Because of their enclosed nature confined spaces are poorly ventilated and allow volatile gases, fumes, vapors, and particulates to accumulate and increase in atmospheric density to potentially explosive levels. Confined spaces represent a hazardous work area and are loosely defined by a few general characteristics. [...] |
| |
07/20/10 |
“Explosion Proof”: Its Not Just a Label
Hazardous work areas are one of the most demanding environments for the workers and equipment that must operate within them. The often confined spaces combined with the presence of volatile materials presents a serious danger of fires and explosions that must be adequately addressed to insure the safety of workers and the public in both the work space and the surrounding area. [...] |
| |
06/28/10 |
Explosion Proof and Intrinsically Safe: There is a Difference
When it comes to explosion proof lighting many people have trouble understanding exactly what the term means. Factor in that there is also the term “intrinsically safe light” which is related to explosion proof lighting, and the fact that few people have had the benefit of a good layman explanation of the terms, and it becomes clear that there is plenty of room for confusion. [...] |
| |
06/02/10 |
Explosion Proof LEDs: Advanced Technology for Spray Booth Applications
One of the most critical aspects of a properly designed spray booth is the type of lighting to be used in its operation. For most applications, the number and size of the lights needed is determined by the size of the booth. The second most important consideration is the quality of the illumination provided by these lights. [...] |
| |
04/22/10 |
Explosion Proof Lights: Lessening the Danger in Hazardous Work Areas
Hazardous work areas present special challenges for the workers and businesses that must operate within them. These work areas are often confined rooms or containers like fuel tanks where vapors and gases from work activities can become concentrated to dangerous levels. As well as the obvious dangers posed by inhalation of these contaminants are the not so obvious dangers that can have lethal consequences if not properly addressed. [...] |
|
|
|
LED Lights - Explosion Proof Paint Spray Booth LED Lighting - 2 Foot, 2 Lamp Fixture - Class 1, Div. 1 
