LED Light Bar contains two 6-watt high powered Infrared LEDs providing 6 watts of LED light power, producing 360 lumens of LED light and drawing only .5 amps on 12 volts. This LED emitter light runs on any voltage ranging from 9 Volts to 42 Volts. With it's new design to include a U-bracket trunnion mount, this 6 watt Infrared LED emitter can be mounted on any flat surface while still being able to adjust the angle after mounting. Note that this fixture's beam can only be seen through the use of night vision goggles. With the 850NM, user can still see a bit of red around the LED bulb when positioned at the correct angle. Whereas 940NM is completely invisible to the naked eye.
BUY AMERICAN COMPLIANT
This LED light emitter bar runs on any voltage ranging from 9 Volts to 42 Volts DC. This means that you can power this and visible LED emitter light from any vehicle, equipment, ATV or boat electrical system. You do not need anything special to operate these multi-voltage units, as an internal voltage regulator controls the power to the LEDs.
There is a one foot pigtail attached to the LED light terminated in a 2 pin Deutsch plug. A wiring harness attaches to the Deutsch socket on the back of the LED light. The harness is terminated in a 2 pin Deutsch plug and includes 20 feet of cable, a relay and a toggle switch that will operate on 12 or 24 volts. The wiring harness is not necessary for installation. Operators can use existing wiring and switches, assuming they are rated for the amperage listed below.
A hinge style mounting bracket enables the operator to affix one portion of the hinge bracket to the mounting surface. Then, the operator can set the angle and attach the upper portion of the hinge style mount to the light. The operator can then adjust the hinge bolt, once the desired angle is set.
Spot Beam Optics Angle: 10 degrees (create a narrower, longer, distance oriented beam)
Flood Beam Optics Angle: 35 degrees (creates a shorter, wider, diffused beam)
Click here to see more information on the spot (narrow) and flood (wide) lens used in this LED light.
Length: 5.2 inches
Height: 3.25 inches
Depth: 2.5 inches
Weight: 2.3 pounds
Number of LEDs: 2
Individual LED Watts: 3 watts/each
LED Maximum Lumen Output: 180 lumen per LED
LED Type: Seoul P7
Total LED Watts: 6
Volts: Accepts input voltage 9-42 Volts DC
Amps: .5 (on 12 volts) 0.25 amps (on 24 volts)
Lumens: 360 total
IR Wavelength: 850nm or 940nm
Housing Color: black or white available. Specialty colors available on request. Powder coat finish.
Housing material: Aluminum
Ambient Operating Temperature Range: -45° C to 85° C
Storage Temperature Range: -45° C to 100° C
Ingress Protection Rating: IP67 (water tight and dust tight)
Mean Lens Temperature: 83° F
Mean Housing Temperature: 99° F
At the Lens: 176,900
At 1 Meter: 11,270
Lens Temperature: 77 degrees F
Mounting Type: Hinge mounting for 180° of possible position angles; U-bracket trunnion mount for surface mounting with adjustability after installation.
Warranty: 3 years
3 year warranty replacement on this LED light (or LED bulbs for light fixtures with removable LED bulbs). After 30 days, the customer ships the failed LED light and/or LED bulb to Larson Electronics’ Magnalight at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics Magnalight will provide a return label via email to the customer. When the failed light is returned, Magnalight will ship a new replacement.