LED Bulb - T-series - 24 Watts - Works with T5, T8 and T12 fluorescent light fixtures.  This can be configured for any T series fluorescent bulb fixture.  This LED requires no ballast.  Internally, you simply bring the black wire to one end and the white wire to the other. The polycarbonate lens diffuses the light and makes this bulb ideal for food safe environments, as there is no glass.  The aluminum housing serves as a heat sink and provides rigidity and strength for this LED bulb.  LED light tubes can also be plugged directly into fluorescent light fixtures with magnetic ballasts, which make them an ideal upgrade for older T12 fluorescent lights with magnetic ballasts.  In fluorescent light fixtures with electronic ballasts, the operator needs to bypass the ballast and wire the power directly to one or both ends of the LED tube (black wire to one end and white wire to the other).  Thus, this is an ideal upgrade for 4 foot fixtures with failed ballasts.   These multi-voltage LED fluorescent bulbs run directly off any voltage ranging from 110 volts to 277 volts, including 120 volts, 230 volts, 277 volts, etc.  We now offer 12/24 volt LED T-series bulbs as well.

Buy American Act Compliant.  

Produced in a World Trade Organization Government Procurement Agreement country.  These are NOT made in China.  They are made in our dedicated factory in South Korea.

These are the second generation of our 24 watt LED tubes. Using an Extech light meter, these LED T-series lamps produced 2.5 times the foot candles of the same 4 foot fixture with two 60 watt T5HO bulbs when measured at a distance of 8 feet.  The lumen output is 80 lumens per watt.

Above: Close up of contact pins and aluminum housing

These LED fluorescent tube replacements can be used as upgrades or replacements to the www.magnalight.com explosion proof fluorescent lights, explosion proof paint spray booth lights as well as any other T series light fixture the operator already has in house.  We have specially designed these for our explosion proof light fixtures, however, they can be used as replacements in standard fluorescent light fixtures.  In our facilities, we replaced worn or spent fluorescent bulbs with these LED bulbs by removing the ballasts and bringing the white wire to one end the black wire to the other end of the LED tube.

Above: aluminum housing and end contact pins

Specifications:

4 foot T series fluorescent lamp replacement. 

50,000 hour life.

Beam angle: 150 degrees

Operating temperature range:  -20 C to 85 C

Color temperature: 4500K (5600K and 6500K available on request)

CRI: 76

Weight:  614 grams

Length:  1198 mm

5 Year Warranty

Above: light emitting polycarbonate lens

Benefits:

50,000 hour lifespan, with no replacement bulbs or maintenance
Can SAVE 50% or more on energy and overall lighting operation
Qualifies retrofit projects for financial incentives, including utility rebates, tax credits and energy loan programs
Further reduces energy use and prolongs life-spans of peripheral cooling units (A/C, refrigeration)
100% recyclable, reduces landfill waste
No lead, mercury or glass eliminates potential injuries and health conditions from hazardous waste in traditional light sources
No UV light, infrared radiation or CO2 emissions
Qualifies buildings for LEED and other sustainable business certifications
Bright, even light that maintains consistent color over time
Instant on/off – No flickering, delays or buzzing
Brings out natural appearance of products in sales or manufacturing applications
Preserves integrity of retail products... no heat damage to formulations or thermal fade of branded packaging in display cases
Produces no UV light at all, so it is safe for displays, paintings and specialty manufacturing environments
Innovative thermal management system extends life of LEDs for up to 50,000 hours of continuous peak use
Solid state lighting is vibration resistant
Surface temperature is cooler than traditional fluorescents
Less frequent outages improves workplace safety
Unlimited indoor applications for overhead lighting, retail fixtures, signage, custom lighting accents, manufacturing and general area illumination 
Easily retrofit existing conventional light fixtures, simplifies troffers since no ballasts needed
Durable enough for portable use in exhibitions and tradeshows
Available in two and four foot lengths

3 year warranty replacement on this LED light (or LED bulbs for light fixtures with removable LED bulbs). After 30 days, the customer ships the failed LED light and/or LED bulb to Larson Electronics’ Magnalight at their expense. If the failure is a manufacturer defect, we will ship a new replacement to the customer. If failure occurs within 30 days of receipt, Larson Electronics Magnalight will provide a return label via email to the customer. When the failed light is returned, Magnalight will ship a new replacement.