Golight Stryker Remote Controlled Spotlight with wired dash mount remote control and wireless handheld remote control. Other part numbers for this Golight include the GLB3200 or GL3200B or GL-3049-W or Golight Stryker with wired controller. This Golight Stryker offers three advantages, including:
1. the brighter output of the Golight Stryker models (compared to Radioray models) as well as the sleeker, lighter form factor.
2. A wired dash mount remote control with memory settings and led position identification. For those of you who want a wired Stryker, this is the only Golight Stryker that provides wired remote control. The dash mount remote control has a 20 foot cord and uses a joystick control to position the light. Dual speed control of the motorized rotation and tilt. LEDs display the angle of the beam and the memory button brings the unit back to its original starting point. This is an ideal feature for remote operation conditions where the operator cannot see the angle of the beam from the driver's seat. The dash mount controller has a power toggle switch, light on/off button, LED brightness control and memory button. The dash mount remote control is 6 1/4 inches long by 2 5/8 inches wide by 2 inches deep. THIS WIRED DASH MOUNT CONTROLLER IS NOT WATERPROOF. IT NEEDS TO BE MOUNTED IN AN INTERIOR LOCATION. THE LIGHT IS WEATHERPROOF. THE CONTROLLER IS NOT.
There are several interesting options on this controller. First and foremost, the memory option is a powerful feature that eables the operator to press the "memory" button and the light will automatically return to the programmed position. The operator programs this function by setting the light to the desired position, and then holding down the memory button, while turning the power on. After continuing to hold the memory button down for 3-5 seconds the LEDs will show the desired position. Then, the operator can move the light to any other pan and tilt position, press the memory button and the light will return to the programmed position.
Secondly, this is only Golight that accelerates to rapid speed after the joystick is depressed more than 2 seconds. The light rotates or tilts slowly at first, but after 2 seconds the light senses that a longer duration is required and accelerates the motorized pan and tilt operations to compensate. Letting go of the joystick returns the motor speed to slow.
Finally, the controller indicates the pan and tilt position of the light via LEDs at all times.
3. An included, but optional, wireless handheld remote control for remote operation up to 150 feet. Use of the handheld remote control is reflected in the LED tracking as well.
Click here to see the instructions for the GL-3049-W and GL-3049-W-M
Click Here to view our GL-3049H-W installed on a custom rig.
Permanent Golight - Golight Stryker GL-3049-W Spotlight with WIRED Dash Remote and Wireless Handheld Remote Contol
