Explosion Proof Paint Booth Fluorescent Light Fixture - 4 foot - 4 lamp - Class 1 Division 1 and Class 2 Division 1 rated. Paint Spray Booth certified.
Our explosion proof fluorescent light are multi-voltage and standard surface mount. Pendant mount available on request.
3 DAY LEAD TIME ON THIS ITEM. FREE SHIPPING. MADE IN THE USA.
1. Each unit dialectically tested.
2. Fixture arrives assembled to reduce installation time and cost.
3. Fixture constructed of extruded corrosion resistant copper free aluminum alloy
4. Over-sized, finned ballast housing for 800 mA fixtures provides more heat dissipation and extends ballast life. Ballast housing easily accessible and externally mounted.
5. Heavy gauge extruded aluminum reflectors (2.5 mm thick) with high gloss reflective finish. Resists dents and corrosion.
6. Relamping can be done from either end of the fixture and all lamp access covers are interchangeable screw type with o-ring seals.
7. Explosion proof, impact and heat resistant glass tubes, provide lamp protection.
8. Spring loaded sockets on both ends hold lamps firmly for maximum shock and vibration protection.
UL Ratings:
a. Class 1 Division 1, Groups C and D
b. Class 1 Division 2, Group A,B,C and D
c. Class II, Division 1 and 2, Groups E,F and G
d. UL 595 Outdoor Marine Type (Saltwater)
e. UL 844, 924
f. UL 1598 Marine Type
ALSO C UL LISTED. UL Certified for Canadian Safety Approval Standards.
Click here to learn more about National Electrical Code Hazardous Location Classifications
Dimensions:
57.76 inches long X 24.90 inches wide X 9.70 inches tall
Weight: 130 pounds
Multi-Voltage unit operates on the following voltages:
120 Volt 60 HZ
220 Volt 50 HZ
240 Volt 60 HZ
277 Volts 60 HZ
347 Volts and 480 Volts available upon request.
Lamp Options:
Our most popular standard lamp configuration uses 60 Watt High Output T-12HO fluorescent lamps producing 4050 lumens per lamp (8100 lumens total). However, we do have options, including:
F54-T5/841/HO – 54 watt, 5000 lumens per bulb, 20,000 hours life, 4100 Kelvin color (Suffix –T5)
F48-T12/HO – 60 watt, 4050 lumens per bulb, 12,000 hours life, 4100 Kelvin color (Suffix –T12HO)
F32-T8/841 – 32 watt, 2950 lumens per bulb, 24,000 hours life, 4100 Kelvin color (Suffix –T8)
F48-T12-D-HO – 60 watt, 4050 lumens per bulb, 12,000 hours life, 5100 Kelvin color (76 CRI - Color Rendition) - This specialty lamp is designed to mimic daylight conditions. For paint spray booth operators requiring a brighter color light than a traditional "cool white", this bulb can be useful. (Suffix –T12DHO)
F-48-T12-VHO – 110 watt, 7000 lumens per bulb, 12,000 hours life, 4200 Kelvin color (Suffix –T12VHO) NOTE: the 110 watt lamps raise the temperature rating from T5 to T6, which is NOT appropriate for paint spray booth applications. The fixture is still Class 1 Division 1 rated, however, this fixture is no longer paint spray booth certified with the 110 watt Very High Output lamp.
NOTE ON LAMPS: There is some confusion on T-12 bulbs. There are 2 types of T-12 bulbs. The older T-12 bulbs ran on magnetic ballasts. Those ballasts have vanished and the T-12 bulbs that work with those ballasts are vanishing as well. All of our explosion proof fluorescent fixtures use electronic ballasts and the F48-T12/HO bulb is widely available and low cost to replace. We use Philips bulbs and they plan to continue the T-12 series indefinitely, as does GE. In fact, GE is now selling an electronic ballast replacement for T12 based fixtures that formerly operated with their magnetic ballasts.
We offer a choice of bulbs with all of our explosion proof fluorescent fixtures. However, we standardize on the T-12HO bulbs mostly for their cold weather start capabilities and 60 watt high output. Many of our customers, including Naval bases, shipyards, oil rigs and petrochemical processing plants operate in very cold conditions, and T-12HO operate best in those environments. The T-12HO bulbs are also the least expensive to replace. T-8 bulbs are inexpensive as well, but you trade off lower light output for longer life. Finally, T-5 bulbs cost about 2 times that of the other bulbs but offer high light output and long life.
The T12VHO, 110 watt Very High Output lamps make this fixture an ideal replacement for 400 watt metal halide surface mount fixtures in hazardous location areas requiring Class 1 Division 1 rated lights. However, the 110 watt T12VHO lamp configuration is not appropriate for paint spray booth applications, since the temperature rating raises to T6.
Click Here for a Photometric Graph of the EPL-48-2L Bulb Types
Mounting options available:
Standard end mounting
Pendant mounting (upon request)
Standard Bracket Mounts:
As illustrated above, the series of mounting holes at the top of the bracket enable the fluorescent light to be attached to any wall, ceiling or floor surface. A simple through bolt can be used to secure the light to the surface. A single junction box at one end of the light is provided for the electrical connection.
Wiring Hub Size
• 1/2 inch threaded
Applications include:
• PAINT SPRAY BOOTHS
• Aircraft maintenance
• Oil drilling rigs
• Refineries
• Solvent and cleaning areas
• Gas processing plants
• Chemical manufacturing
• Waste treatment plants
• Gas processing plants
Explosion Proof Lights - Explosion Proof Fluorescent Lights for Paint Booths - 4 foot - 4 lamp
