Explosion proof light with cast aluminum housing and heat-resistant, 3/4" thick, rubber-gasketed glass lens withstand abuse in the most demanding environments, including saltwater marine locations. The 70 watt metal halide lamp produces light output equivalent to a 400 watt halogen lamp, with less heat output and lower amp draw. In addition, since there is no filament to break, this fixture is ideal for high vibration environments and the bulbs have a 2500+ hour life. This explosion proof light fixture covers 13,000 square feet of area with illumination. Equipped with a base stand and plastic covered, aluminum handle this portable hazardous location light is ideal for general illumination in any confined space area (silo, tank or manhole). Side adjustment knobs enable operators to set the angle of light within those areas.
Made in the USA
The spun aluminum base is 12 1/2" dia. with three 0.437" dia. holes for permanent mounting. Height is 15 7/8" with mounting base attached. Explosion proof light fixture dimensions are 13 1/4" wide by 11 1/2" high by 12 1/2" deep. Fixture weighs 25 pounds with base and cord.
Lights operate on 120 VAC and are supplied with 100 feet of 16/3 SOOW cord and explosion proof straight blade plug (other plugs available on request).

This image shows a 40' container without any illumination.

This image shows the EPL-BS-70-100 illuminating the container. Keep in mind that the container, with dimensions of 40'L X 8'W X 10' H is restricting the EPL-BS-70-100, actual beam is exceptionally more in length, height, and width.
UL and CSA certified for the following:
Class I & II, Division 1 & 2, Groups C and D.
Class II Division 1 & 2, Groups F and G.
Class III.
UL 595 listed for marine use and UL 781 listed for portable use in hazardous locations.
Click here to learn more about National Electrical Code Hazardous Location Classifications
Configuration: 70 Watt double ended metal halide lamp within cast aluminum light fixture head. Metal halide bulbs burn gas and do not contain a filament. As a result, this lamp generates light coverage equivalent to a 400 watt halogen lamp, without the associated heat or amp draw.
Explosion Proof Light Rating: Class 1 Division 1, Groups C and D with T-4 temperature rating. Class 2 Division 1, groups F and G. Class 3.
Wet weather / outdoor location rated - UL 595 rated for marine and saltwater use
SAME DAY SHIPPING AVAILABLE!
Applications: All, including marine and outdoor wet location applications.
Configuration: Light mounted on circular base stand.
Electrical Information: 100 foot, 16/3 SOOW cord with ECP 1523 5-15p Class 1 Division 1 explosion proof straight blade plug. This explosion proof light runs on 120 Volts AC.
Draw: .58amps
Light Coverage Area: 13,000 square feet
Cord: 100 foot 16/3 SOOW (abrasive and oil resistant) cord
Plug: ECP 1523 5-15P explosion proof straight blade plug
Mount: Circular base stand
Explosion proof light fixture specifications:
Explosion flood light encloses a double ended 70 watt metal halide bulb, internal ballast and aluminum finish reflector in a copper-free cast aluminum housing. Shell, covers and sealed fittings are also made of copper-free aluminum. This explosion proof flood light has a thermal shock and impact resistant tempered glass lens and threaded joints lubricated with non-drying lubricant. Threaded joints between fixture shell and cover permit internal pressure to be dissipated and cooled, preventing the escape of flame or heat.
The 70 watt metal halide lamp produces light output equivalent to a 400 watt halogen lamp, with less heat output and lower amp draw. In addition, since there is no filament to break, this fixture is ideal for high vibration environments and the bulbs have a 2500+ hour life. This explosion proof light fixture covers 13,000 square feet of area with illumination.
UL and CSA safety certified for 844 Hazardous Locations, including:
Class 1, Division 1, Groups C & D
Class II, Division 1, Groups F & G
Also meets standard 595 for Marine Type Fixtures for outdoor and saltwater use.
Fixture dimensions:
Width: 11 9/16 inches
Height: 11 1/2 inches
Depth: 9 1/4 inches
Weight: 19 pounds
Applications include but are not limited to wastewater treatment plants, refinery tanks, oil and gasoline loading docks, coal pulverizing facilities, munitions storage areas, tunnel projects, utility gas plants, power plant areas, hazardous areas and mining conveyor belts.

YOU CAN RENT THIS UNIT. Contact 1-800-369-6671 to make arrangements.