MOTORIZED REMOTE CONTROL HIGH INTENSITY DISCHARGE (HID) SPOTLIGHT WITH WIRED DASH MOUNT CONTROLLER
The RCL360-HID is a remote controlled, heavy duty HID spotlight, producing 4500 lumens (equivalent to 600,000 industrial candlepower rating and a 15 million retail candlepower rating. This HID spotlight produces an 4,100 foot beam with a 50 watt HID bulb and ballast combination. This motorized spotlight can be positioned by hand, due to its "slip" motor design, however a hard wired dash mount controller features a stainless steel joystick for remote operation. This motorized HID spotlight produces a working beam that reaches 4,100 feet and is 255 feet wide at its widest point.
This image shows a dark suburban street, illuminated by nothing but distant street lights.
This image shows the same street, this time being illuminated by the RCL360-HID; the beam easily breaks through the distant street lights to illuminate the trees over 2900' away. The beam is show reflecting off a guard rail over 4500' away from the camera point of origin.
Operators can control the output and position of this HID light with the wired dash mount controller, which is connected to the light via a 20 foot wire harness. A key feature of this remote control spotlight is the "up and over" capability. Unlike most remote control lights, this light can be used to point straight upwards while maintaining full beam width. There are no housing or physical limits blocking the upward facing angles. This light can also point nearly directly downward, limited only by the very narrow base. Basically, this remote controlled light offers a complete range of coverage, due to its unique "yolk" based designed.
Another unique aspect of this light is that the light can be moved in two directions simultaneously. Most remote controlled spotlights can be right and left or up and down independently. This light can be moved at 45 degree angles. For example, you can move the light down and to the right at the same time. This enables the operator to position the light very easily on even the smallest target. This can be helpful for driving and spotting. To some extent, this light embodies the finite controls afforded the operator by pillar mount spotlights with a motorized remote control joystick.
“Click here for a more compact, commercial grade alternative for low vibration applications.”
MADE IN THE USA. Certificate of origination provided on request. NAFTA compliant.
MOTORIZED TILT AND ROTATION
Electric motors control full horizontal and vertical light movement via a hard-wired joystick control that can be mounted anywhere in the vehicle, boat or heavy equipment. This remote controlled HID spotlight will not interfere with IED detectors, radios or other sensitive radio frequency equipment. This remote control light uses "slip drive" motors, which enables the operator to hand position the unit if they choose without causing damage to the motors. Slip drive motors also mean that accidentally hitting the light on tree branches or other obstacles doesn't damage the motor, clutch or gears.
LIGHT BEAM OPTIONS
This HID light can be configured for a spotlight or flood light configuration. Please select below under Beam options for spotlight or flood light. The 50 watt HID bulb produces 4500 lumens, which is equivalent to a 600,000 industrial candlepower rating and a 15 million retail candlepower rating. In a flood beam configuration, this light casts a 350 foot by 250 foot beam. In a spot beam configuration, this HID light casts a 4,100 foot beam that is 255 feet at its widest point. The difference between the spot and flood configuration is based on the use of different lens/reflector combinations to either let the light pass directly outward for distance (spot) or diffuse the light for a wider, softer beam (flood).
FEATURES
Motor-controlled light provides 370° of motion on the horizontal axis and 350° vertically.
Weather-resistant light and base provides safe, dependable operation in the most demanding environments including fresh water and salt water humidity. The weather resistant properties are due to the UV resistant housing materials and the individually potted and sealed electrical components. The motors, board controllers, ballast and other components are completely potted and sealed and connected via weatherproof connections. All support materials are Delrin, stainless steel, polycarbonate or brass. Saltwater is not an issue. The light can be exposed to waves, rain and other water sources under high wind conditions.
THIS LIGHT IS DESIGNED TO BE INSTALLED UPRIGHT, UPSIDE DOWN OR AT ANY ANGLE.
VOLTAGE
Available in 12-24 volts DC.
REMOTE
Remote: Hard-wired joystick control with standard 20' harness length that is 10mm thick and connects to the light. other lengths available upon request. A simple rocker switch (as shown below) is used to turn the beam on or off. The metal joystick is extremely durable. A basic crimping tool is required to make the wiring connections. The 16 gauge wire harness, controller and joystick are very heavy duty and are designed for land or marine applications. A separate on/off rocker switch controls the light bulb. Dimensions of the wired remote control are 122mm Long by 64mm Tall by 65mm Deep.
Click Here for Dimensional Drawing of the Hardwired Remote Control
MOUNTING and WIRING
Three through holes at the base of the light are used to mount the light to the surface with included screws. The 6 wire wiring harness is shipped in the box and attaches via simple crimp connectors. By using crimp connectors instead of a dedicated large connector, operators can avoid drilling large holes in the vehicle to pass the harness. A 3/8 inch hole is sufficient for the wiring harness.
.jpg)
Materials:
Stainless steel and Delrin. All internal moving components are made from stainless steel and Delrin (acetal copolymer). The motor assemblies, shafts, brackets and other structural items are made from stainless steel, while the gears are made from a self lubricating grade of Delrin (acetal copolymer). Delrin is a unique resin designed by Dupont and is commonly used as an alternative to steel in applications where saltwater, chemicals and high heat are an issue. Delrin is chemical resistant, oil resistant, saltwater resistant and maintains its properties in sub zero temperatures (-40 C) and temperatures well over 200 degrees C. These materials are chosen for their ability to provide long lasting durability in inclement environments, making this remote controlled light an ideal solution for mining, oilfield and saltwater applications. The housing is made from UV resistant polycarbonate with a brass back plate for support.
DIMENSIONS:
12/24 Volt Spotlights - Motorized Remote Control HID Spotlight - 4500 Lumens - Wired Dash Controller - 50W HID Bulb 
